Colour Code:
Matt Finish
Premium emulsion that keeps the walls looking cleaner and beautiful for longer period of time. It provides good stain resistance to allow cleaning common household stains off walls easily. It comes with anti-bacterial functionality.
Healthcare
Residential
Education
Commercial
Ask us anything related to this product. We will get back to you as soon as possible.
Ask UsDulux Professional Interior Washable is a premium emulsion that keeps the walls looking cleaner and beautiful for longer period of time. It provides good stain resistance to allow cleaning common household stains off walls easily. It comes with anti-bacterial functionality that aids to inhibit growth of bacteria on walls. Stains are easy to be removed without damaging the paint film. It is - suitable for both new and suitably primed previously painted masonry and building board surface
Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose and defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Treat any areas affected by mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust. Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.
Application Tools
By roller, brush or conventional/airless spray.
Dilution
Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%.
Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.