Colour Code:
Sheen Finish
Premium washable acrylic paint for use on all interior walls with subtle, low sheen finish. StainResist™ film technology enable early stain resistance and delay stains from penetrating deep into the paint film. Now with anti-bacterial and anti-virus.
Healthcare
Residential
Education
Commercial
Ask us anything related to this product. We will get back to you as soon as possible.
Ask UsPremium quality washable acrylic paint for use on all interior walls where a subtle, elegant low sheen finish is required. Its StainResist™ film technology enable early stain resistance and delay stains from penetrating deep into the paint film. With its anti-bacterial and anti-virus property, it also aids to inhibit growth of certain bacteria and virus on walls, providing protection for your walls not only from stains but also certain bacteria and virus.*
Ideal for new and previously painted interior masonry, plaster, and building boards surfaces.
(*) Under test conditions. Effective against human coronavirus NL-63 (99% efficacy) - with 30 min of exposure on the painted surface (tested by IMSL lab UK). Virus and bacteria can also spread through other external/internal surfaces
Tips & Advice
Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose and defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Treat any areas affected by mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust. Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.
Application Tools
By roller, brush or conventional/airless spray.
Dilution
Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 10%. Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.